How to turn on, use and turn off MSCW hall PA

Setting up/ turning on;
1. Turn on light switch on right hand side of wall
2. Turn on 4 switches located right hand side of bio box in bottom cupboard
3. Turn on both power amps A then B
4. On power Amp B, turn on both dials so they are at 3 o'clock
5. Turn on the 2 master faders up to 0 which is located on the mixer on the bottom right hand side (coloured yellow)
Operating;
6. Take out the UHFI microphone located in the over head cupboards on the left side
7. Switch on the mic and turn the UHFI fader up to 0
8. Make sure that the battery works and test the mic (test 1,2)
9. Turn up the lectern mic ( stage East fader to 0)
10. Check that the Phantom power is turned on
Turning off;
11. Turn the master faders down on the mixing desk
12. Turn the dials on power Amp B to 0, the switches on power amp B then A
13. Turn 4 switches off
14. Put away the microphone
15. Turn light switch off